SAS 6G BusXpert Pro
- – Up to 36GBytes of trace buffer
- – Two or Four bi-directional ports per box
- – Fully supports Muxing in the new SAS 2.0 specification
- – Eight LED's for each bi-directional port provide real-time monitoring. There are also LED's for speed (tri-colored) and muxing
- – External Trigger in and out connectors for cross-triggering with other equipment such as oscilloscopes or logic analyzers
- – Manual Trigger button on the front of the analyzer
- – PCIe (PCI Express) x4 connection for upload speeds of up to 550 MB/sec. A PC with a high-bandwidth storage system can save a 9GB trace in under 20 seconds!!!
- – GIGe connectivity with hardware acceleration for network connectivity at up to 70 MB/sec.
- – Native SAS PHY interface with programmable tuning of amplitude, pre-emphasis and equalization on all individual lanes. You'll rarely have to use the tuning, but it's helpful if you have unusual cables or prototype hardware with impedance mismatches
- – Real-time SAS Address collection engine runs even when the analyzer isn't capturing. No more typing full or hashed addresses into triggers or filters. Just drag and drop from the collection engine
- – 2ns timestamp resolution
分析能力:
Protocol View : 此視窗適合分析Initiator及Target之間的Handshake. 可精確的表現出每個DWORD之間的時間關係.
Spreadsheet View : 此視窗能照著發生的時間順序秀出Frame, Premitive及OOB.
Transaction View : 此視窗可照著發生順序秀出每一個Command. Command可以進一步展開秀出組成此Command的所有Frame.
Frame Detail : 會照著SATA/SAS的規格解譯出每一個Frame的內容.
Data View : 此視窗可針對您所選擇的DATA Frame照著SATA/SAS規格提供多種不同格式的解譯.
